Windsor Forklift Training School

Windsor Forklift Training School - What Are Covered In A Forklift Training School? - CSA and OSHA establish criteria for forklift safety training which meets current regulations and standards. Anyone planning to use a forklift is needed to successfully finish safety training prior to making use of whatever kind of forklift. The accredited Forklift Operator Training Program is designed to provide trainees with the information and practical skills to become a forklift operator.

There are forklift operation safety rules that must be followed pertaining to pre-shift inspections, and regulations for lifting and loading.

Prior to a shift beginning, an inspection checklist has to be done and submitted to the Supervisor or Instructor. If whichever maintenance issue is discovered, the equipment must not be used until the issue is addressed. To be able to indicate the machinery is out of order, the keys must be removed from the ignition and a warning tag placed in a place which is seen.

Loading safety regulations include checking the rating capacity on the forklift nameplate and determining if the weight of the load falls within capacity. The forklift forks should be in the down position when the forklift is starting up. Remember that there is a loss of about 100 pounds carrying capacity for every inch further away from the carriage that the load is carried.

So as to safely lift a palletized load, drive the forklift to the pallet and stop with the fork three inches from the load. Level the mast until it is at right angles to the load. Lift the forks to an inch beneath the slot on the pallet and drive forward. Afterward lift forks four inches. Tilt back the load to be able to secure it for moving. Drive the lift in reverse if the load obscures frontal vision. Check behind and honk to warn other personnel. Never allow forks to drag on the ground.

Click to Download the pdf