Windsor Forklift Training Course

Windsor Forklift Training Course - Industry and federal regulators have established the criteria for forklift safety training according to their existing regulations and standards. Those wanting to operate a forklift must complete a forklift training course before utilizing one of these machines. The accredited Forklift Operator Training Program is meant to offer individuals training with the knowledge and practical skills to become a forklift operator.

There are forklift operation safety regulations that must be followed pertaining to pre-shift inspections, and rules for loading and lifting.

Prior to a shift beginning, an inspection checklist needs to be done and given to the Instructor or Supervisor. If whatever maintenance problem is discovered, the machinery must not be used until the problem is dealt with. To indicate the machinery is out of service, the keys must be removed from the ignition and a warning tag placed in a spot which is seen.

Loading safety regulations comprise checking the forklift nameplate's rating capacity and knowing if the weight of the load falls within capacity. The forklift forks should be in the downward position when the forklift is starting up. Remember that there is a loss of approximately 100 pounds carrying capacity for every inch further away from the carriage that the load is carried.

To be able to safely lift a palletized load, drive the forklift toward the pallet and halt with the fork three inches away from the load. Level the mast until it is at right angles to the load. Lift the forks to an inch beneath the slot on the pallet and drive forward. Then lift forks four inches. Tilt back the load to secure it for moving. Drive the lift in reverse if the load obscures frontal vision. Check behind and honk to alert other staff. Never allow forks to drag on the ground.

Forklift loads must be loaded in such a way that they are secure and do not create a danger to other objects or people. Restraining loads is required for materials that could shift during transport and destabilize the forklift.

To avoid the movement of drums, drums could be strapped together to reduce movement. Forklift operators must drive slowly when moving liquids, to lessen instability in the forklift.

Click to Download the pdf